CNC Tilting Rotary Tables Min. indexing angle –0.001°
FHR Series(Hydraulic Brake)
Dual-axis single-arm type
FHR-400S
FHR-650S-525/550
FCHR Series(Hydraulic Brake)
Single-arm pallet change type
FCHR-650S-550
- SPECIFICATION
- DIMENSION
- FEATURE
SPECIFICATION
| Item/Model | Unit | |
|---|---|---|
| Table Diameter | mm | |
| Diameter of Table Central Hole | mm | |
| Inner Diameter of Mandrel Sleeve | mm | |
| Diameter of Center Through Hole | mm | |
| Table Height (Horizontal) | mm | |
| Table T-slot Width | mm | |
| Guide Block Width | mm | |
| Axis | - | |
| Min. Increment | deg. | |
| Indexing Precision | sec. | |
| Repeatability | sec. | |
| Clamping System |
kg/cm2 | |
| Clamping Torque | kg-m | |
| Servo Motor Model | FANUC | - |
| MITSUBISHI | - | |
| Speed Reduction Ratio | - | |
| Max. Rotation Rate of Table (Calculate with Fanuc α Motor) | r.p.m | |
| Allowable Inertia Load Capacity | kg.cm.sec2 | |
| Allowable Workpiece Load | 0º Horizontal |
kg |
0º~90º Tilt |
kg | |
| Allowable Load(with Rotary Table Clamping) | F |
kgf |
FxL |
kgf.m | |
FxL |
kgf.m | |
Driving Torque(Rotary axis) |
kgf•m | |
| Net Weight (servo motor excluded) | kg | |
| FHR-400S | FHR-650S-525 / 550 | ||
|---|---|---|---|
| Ø400 | Ø650 | ||
| - | - | ||
| Ø120H7x35 deep | - | ||
| Ø105 | - | ||
| - | - | ||
| 14H7 | 18H7 | ||
| - | - | ||
| Rotation | Tilt (±100º) | Rotation | Tilt (±110º) |
| 0.001 | 0.001 | 0.001 | 0.001 |
| 15 | 60 | 15 | 60 *¹ |
| 6 | 8 | 6 | 8 |
| 35 | 35 | 35 | 35 |
| 115 | 200 | 370 | 500 |
| αiS12 | αiF22(Straight) | αiF12 | αiF40(Straight) |
| HG/HF-154 | HG/HF-354 | HF-204 | HF-703 |
| 1:120 | 1:150 | 1:120 | 1:150 |
| 25 | 13.3 | 25 | 13.3 |
| 44 | 158.4 | ||
| 220 | 500 | ||
| 120 | 300 | ||
| 1800 | - | ||
| 200 | 500 | ||
| 115 | 370 | ||
| 80 | 250 | ||
| 482 | 1120 | ||
| Item/Model | Unit | |
|---|---|---|
| Table Diameter | mm | |
| Diameter of Table Central Hole | mm | |
| Inner Diameter of Mandrel Sleeve | mm | |
| Diameter of Center Through Hole | mm | |
| Table Height (Horizontal) | mm | |
| Table T-slot Width | mm | |
| Guide Block Width | mm | |
| Axis | - | |
| Min. Increment | deg. | |
| Indexing Precision | sec. | |
| Repeatability | sec. | |
| Clamping System |
kg/cm2 | |
| Clamping Torque | kg-m | |
| Servo Motor Model | FANUC | - |
| MITSUBISHI | - | |
| Speed Reduction Ratio | - | |
| Max. Rotation Rate of Table (Calculate with Fanuc α Motor) | r.p.m | |
| Allowable Inertia Load Capacity | kg.cm.sec2 | |
| Allowable Workpiece Load | 0º Horizontal |
kg |
| 0º~90º Tilt |
kg | |
| Allowable Load(with Rotary Table Clamping) | F |
kgf |
| FxL |
kgf.m | |
| FxL |
kgf.m | |
| Driving Torque(Rotary axis) |
kgf•m | |
| Net Weight (servo motor excluded) | kg | |
| FCHR-650S-550(Single-arm, pallet change type) | |
|---|---|
| Ø650 | |
| - | |
| Ø50H7x27 deep | |
| - | |
| - | |
| 18H7 | |
| - | |
| Rotary axis | Tilt axis ±100º |
| 0.001 | 0.001 |
| 15 *¹ | 60 *¹ |
| 6 | 8 |
| 35 | 35 |
| 370 | 500 |
| αiF12 | αiF40 |
| HG/HF-204 | HG/HF-703 |
| 1:120 | 1:150 |
| 25 | 13.3 |
| 154.8 | |
| 250 | |
| 250 | |
| - | |
| 500 | |
| 370 | |
| 250 | |
| 1434(including 2 pallets) | |
- ★*¹Indexing precision can be better after installing angle encoder. Please refer to the table on page 70 for more details.
- ★*In accordance with the foreign trade control ordinance, permission of the ministry of economy, trade and industry is required when exporting dual-axis products overseas.
DIMENSION
FHR-400S
FHR-650S-525Dual-axis single-arm type
(Hydraulic Brake)
FHR-650S-550Dual-axis single-arm type
(Hydraulic Brake)
FCHR-650S-550Single-arm, pallet change type
(Hydraulic Brake)
FEATURE
 |