CTU Series(Hook type Auto pallet changer)
CTU-400x600 / 500x700
(Table size can be customized)(180° to and fro)
For C type vertical machining center or drilling & tapping center
CURC Series(Hook type CNC Auto pallet changer)
CURC-500x700
(Table size can be customized)(180° to and fro)
For C type vertical machining center or drilling & tapping center
- SPECIFICATION
- DIMENSION
- FEATURE
SPECIFICATION
| Item/Model | Unit | |
|---|---|---|
| Lift-up mechanism | - | |
| Table size | mm | |
| Rotation method | - | |
| Rotation angle | deg. | |
| Clamping System | kg/cm2 | |
| Positioning method | - | |
| clamping force of positioning cones(35kg/cm2) | kgf | |
| Operating System(Up & Down & Rotate) | kg/cm2 | |
| Lifting thrust force | kg | |
| Up and down travel of the pallet | mm | |
| Allowable Workpiece Load | Horizontal |
kg |
| Inspection accuracy | ||
| Repeatability accuracy on positioning of the same pallet | mm | |
| Max. positioning tolerance for 2 pallets | mm | |
| Parallelism of pallet top and base bottom | mm | |
| CTU-400x600 | CTU-500x700 |
|---|---|
| Hook type (U type) | Hook type (U type) |
| □ 400 x 600 | □ 500 x 700 |
| Hydraulic hirth coupling | Hydraulic hirth coupling |
| 180º to and fro | 180º to and fro |
| Hydraulic 35 | |
| Cone positioning | Cone positioning |
| 960x4=3840 | 960x4=3840 |
| Hydraulic 45 | |
| 2860 | 2860 |
| 60 | 60 |
| 250x2=500 | 250x2=500 |
| 0.01 | |
| 0.02 | |
| 0.02 | |
| Item/Model | Unit | |
|---|---|---|
| Lift-up mechanism | - | |
| Table size | mm | |
| Rotation method | - | |
| Rotation angle | deg. | |
| Clamping System (Hydraulic) | kg/cm2 | |
| Positioning method | - | |
| clamping force (35kg/cm2) | kgf | |
| Operating System (Up & Down & Rotate) | kg/cm2 | |
| Lifting thrust force | kgf | |
| Up and down travel of the pallet | mm | |
| Servo Motor Model | FANUC | Straight shaft |
| DELTA | ||
| MITSUBISHI | ||
| Speed Reduction Ratio | - | |
| Allowable Work-piece Load | Horizontal |
kg |
| Inspection accuracy | ||
| Repeatability accuracy on positioning of the same pallet | mm | |
| Max. positioning tolerance for 2 pallets | mm | |
| Parallelism of pallet top and base bottom | mm | |
| Net weight of saddle and one faceplate | kg | |
| CURC-500x700 | |
|---|---|
| Hook type (U type) | |
| □ 500 x 700 | |
| Servo motor | |
| 180º to and fro | |
| 35 | |
| Cone positioning | |
| 960x4=3840 | |
| Hyd.35 | |
| 2200 | |
| 60 | |
| βiS12 | |
| ECMA-E 1320GS | |
| HG-224 | |
| 1 : 90 | |
| 250x2=500 | |
| 0.01 | |
| 0.02 | |
| 0.02 | |
| 712 | |
DIMENSION
CTU-400x600The type of hook plate fixed on the exchanging mechanism.
CTU-500X700The type of hook plate fixed on the exchanging mechanism.
CURC-500X700Hook type CNC auto pallet changer
FEATURE
 |