2 Wheel Coupled Series( Pneumatic / Hydraulic Brake )
The 4th & 5th Axis Direct Drive Motor Series
FAR(s)-170-2W-RC255 / FAR(s)-210-2W-RC255
FHR-255-2W-RC320
FHR(s)-350F-2W-RC320-2A
-170-RC255-series-model.png)
- SPECIFICATION
- DIMENSION
- VIDEO
SPECIFICATION
| Item | Unit | |
|---|---|---|
| Table Diameter | mm | |
| Diameter of Table Central Hole | mm | |
| Inner Diameter of Mandrel Sleeve |
mm | |
| Diameter of Center Through Hole | mm | |
| Table Height (Horizontal) |
mm | |
| Table T-slot Width | mm | |
| Guide Block Width |
mm | |
| Axis | - | |
| Transmission Mechanism | - | |
| Min. Increment | deg. | |
| Indexing Precision | sec. | |
| Repeatability | sec. | |
| Clamping System |
kg/cm2 | |
| Clamping Torque | kg-m | |
| Servo Motor Model | FANUC | Taper / Straight |
| MITSUBISHI | Straight | |
| SIEMENS |
Straight | |
| Speed Reduction Ratio | - | |
| Max. Rotation Rate of Table (Calculate with FANUC α Motor) |
r.p.m | |
| Allowable Inertia Load Capacity (Horizontal) | kg.cm.sec2 | |
| Allowable Workpiece Load(dynamic) | 0º Horizontal |
kg |
0º~90º Tilt |
kg | |
| Allowable Load (with clamping) |
F |
kgf |
FxL |
kgf.m | |
FxL |
kgf.m | |
Strength of Roller Gear Cam  |
kg.m | |
| Net Weight (Not including servo motor) | kg | |
| FAR(s)-170-2W-RC255 / FAR(s)-210-2W-RC255 | |
|---|---|
| Ø170 / Ø210 | |
| Ø67 | |
| Ø40H7 | |
| Ø40 | |
| 280 | |
| 12H7 | |
| 18h7 | |
| Rotary axis | Tilt axis ±110˚ |
| Worm & Worm Gear | Roller Gear Cam |
| 0.001 | 0.001 |
| 40 | 60 |
| 6 | 8 |
| 6(Pneumatic) | 35 |
| 31 | 140 |
| αiF8 / ßiS12 | αiS12 / ßiS12 |
| HG / HF-154 | HG / HF-154 |
| 1FK7063 | 1FK7063 |
| 1：90 | 1：60 |
| 44.4 *(33.3) | 33.3 |
| 2.7(Ø170) / 4.2(Ø210) | |
| 50(single plate) | |
| 40(single plate) | |
| 750 | |
| 140 | |
| 31 | |
| 18 *(14.6) | |
| 305(Ø170) / 312(Ø210) | |
| Item | Unit | |
|---|---|---|
| Table Diameter | mm | |
| Diameter of Table Central Hole | mm | |
| Inner Diameter of Mandrel Sleeve |
mm | |
| Diameter of Center Through Hole | mm | |
| Table Height (Horizontal) |
mm | |
| Table T-slot Width | mm | |
| Guide Block Width |
mm | |
| Axis | - | |
| Transmission Mechanism | - | |
| Min. Increment | deg. | |
| Indexing Precision | sec. | |
| Repeatability | sec. | |
| Clamping System |
kg/cm2 | |
| Clamping Torque | kg-m | |
| Servo Motor Model | FANUC | Taper / Straight |
| MITSUBISHI | Straight | |
| SIEMENS |
Straight | |
| Speed Reduction Ratio | - | |
| Max. Rotation Rate of Table (Calculate with FANUC α Motor) |
r.p.m | |
| Allowable Inertia Load Capacity (Horizontal) | kg.cm.sec2 | |
| Allowable Workpiece Load(dynamic) | 0º Horizontal |
kg |
| 0º~90º Tilt |
kg | |
| Allowable Load (with clamping) |
F |
kgf |
| FxL |
kgf.m | |
| FxL |
kgf.m | |
| Strength of Roller Gear Cam |
kg.m | |
| Net Weight (Not including servo motor) | kg | |
| FHR-255-2W-RC320 | |
|---|---|
| Ø255 | |
| Ø110 | |
| Ø80H7 | |
| Ø80 | |
| 325 | |
| 12H7 | |
| 18h7 | |
| Rotary axis | Tilt axis ±110˚ |
| Worm Gear | Roller gear Cam |
| 0.001 | 0.001 |
| 40 | 60 |
| 6 | 8 |
| Pne. 35 | 35 |
| 70 | 175 |
| αiF12 / βis12 | αiF12 / βis12 |
| HG/HF-154 | HG/HF-204/354 |
| 1FK7063 | 1FK7083 |
| 1：150 | 1：90 |
| 16.6 | 16.6 |
| 2.7 / 4.13 | |
| 100(per plate) | |
| 75(per plate) | |
| 1000 | |
| 175 | |
| 70 | |
| 55 | |
| 740 | |
- ★*()Alloy Steel worm & gear series.
- ★*In accordance with the foreign trade control ordinance, permission of the ministry of economy, trade and industry is required when exporting dual-axis products overseas.
| Item | Unit | |
|---|---|---|
| Table Diameter | mm | |
| Diameter of Table Central Hole | mm | |
| Inner Diameter of Mandrel Sleeve |
mm | |
| Diameter of Center Through Hole | mm | |
| Table Height (Horizontal) |
mm | |
| Table T-slot Width | mm | |
| Guide Block Width |
mm | |
| Axis | - | |
| Transmission Mechanism | - | |
| Min. Increment | deg. | |
| Indexing Precision | sec. | |
| Repeatability | sec. | |
| Clamping System |
kg/cm2 | |
| Clamping Torque | kg-m | |
| Servo Motor Model | FANUC | Taper / Straight |
| MITSUBISHI | Straight | |
| SIEMENS |
Straight | |
| Speed Reduction Ratio | - | |
| Max. Rotation Rate of Table (Calculate with FANUC α Motor) |
r.p.m | |
| Allowable Inertia Load Capacity (Horizontal) | kg.cm.sec2 | |
| Allowable Workpiece Load(dynamic) | 0º Horizontal |
kg |
| 0º~90º Tilt |
kg | |
| Allowable Load (with clamping) |
F |
kgf |
| FxL |
kgf.m | |
| FxL |
kgf.m | |
| Strength of Roller Gear Cam |
kg.m | |
| Net Weight (Not including servo motor) | kg | |
| FHR-350F-2W-RC320-2A | |
|---|---|
| Ø350 | |
| Ø150 | |
| Ø120H7 | |
| Ø120 | |
| 370 | |
| 14H7 | |
| 18h7 | |
| Rotary axis | Tilt axis ±110˚ |
| Worm Gear | Roller Gear Cam |
| 0.001 | 0.001 |
| 40 | 60 |
| 6 | 8 |
| 35 | 35 |
| 115 | 230 |
| αiS12 / βiS22 | αiS12 x2 |
| HG / HF-204 | HG / HF-154 x2 |
| 1FK7083 | 1FK7083 x2 |
| 1 : 120 | 1 : 60 |
| 25 | 16.6 |
| 23 (per plate) | |
| 150 (per plate) | |
| 150 (per plate) | |
| 1800 | |
| 230 | |
| 115 | |
| 80 | |
| 1080 | |
- ★*In accordance with the foreign trade control ordinance, permission of the ministry of economy, trade and industry is required when exporting dual-axis products overseas.
DIMENSION
FAR(s)-170-2W-RC255Tilt axis: Driven by Roller Gear Cam
-170-2W-RC255-b.jpg)
FHR-255-2W-RC320Tilt axis: Driven by Roller Gear Cam
FHR-350F-2W-RC320-2ATilt axis: Driven by Roller Gear Cam
