-
AR Series:
Ø125-250 Pneumatic brake(Right Side Motor) -
AR Series:
Ø125-250 Pneumatic brake(Left Side Motor) -
AR Series:
Ø125-250 Pneumatic brake(Back Side Motor) -
Multi Spindle:
Ø125-210 Pneumatic Brake -
HR Series:
Ø210-800 Hydraulic Brake -
HR Series:
Ø320-400 Hydraulic Brake (Back Side Motor) -
2-wheel coupled Series:
Ø320 Hydraulic Brake -
iHHR Series:
Ø400 Hydraulic Brake (Embeded type)
CNC Rotary Tables (Min indexing angle – 0.001˚)
AR Series( Powerful Pneumatic Brake )- Right Side Motor
AR(s)-125R/170R/210R/250R/255HR
- SPECIFICATION
- DIMENSION
- FEATURE
SPECIFICATION
Hydraulic AR(s)-170HR/210HR/250HR are alternatives.
Item/Model | Unit | |
---|---|---|
Table Diameter | mm | |
Diameter of Table Central Hole | mm | |
Inner Diameter of Mandrel Sleeve | mm | |
Diameter of Center Through Hole | mm | |
Center Height (Vertical) | mm | |
Table Height (Horizontal) | mm | |
Table T-slot Width | mm | |
Guide Block Width | mm | |
Min. Increment | deg. | |
Indexing Precision | sec. | |
Repeatability | sec. | |
Clamping System (Pneumatic) |
kg/cm2 | |
Clamping Torque | kg-m | |
Servo Motor Model | FANUC | Taper shaft |
MITSUBISHI | Taper shaft | |
Speed Reduction Ratio | - | |
Max. Rotation Rate of Table (Calculate with Fanuc α Motor) | r.p.m | |
Allowable Inertia Load Capacity (Horizontal) | kg.cm.sec2 | |
Allowable Workpiece Load | Vertical | kg |
with Tailstock | kg | |
Horizontal | kg | |
Allowable Load(with Rotary Table Clamping) | F | kgf |
FxL | kgf.m | |
FxL | kgf.m | |
Strength of worm gears | kg.m | |
Net Weight (servo motor excluded) | kg |
AR(s)-125R | AR(s)-170R |
---|---|
Ø 125 | Ø 170 |
Ø 35H7 | Ø 67 |
- | Ø 40H7 |
Ø 25 | Ø 40 |
110 | 135 |
152 | 152 |
12H7 | 12H7 |
14h7 | 18h7 |
0.001 | 0.001 |
40 | 20 |
6 | 6 |
6 | 6 |
13 | 31 |
αiS4 / ßiS4 | αiF4 / αiF8 / ßiS8 |
HG/HF-75 / 105 | HG/HF-54 / 104 |
1:60 | 1:90 |
83.3 *(33.3) | 44.4 *(33.3) |
2 | 5.4 |
50 | 75 |
100 | 150 |
100 | 150 |
1000 | 1450 |
45 | 110 |
13 | 31 |
9 *(3.7) | 18 *(14.6) |
34 | 50 |
- ★*()Alloy Steel worm & gear series.
Item/Model | Unit | |
---|---|---|
Table Diameter | mm | |
Diameter of Table Central Hole | mm | |
Inner Diameter of Mandrel Sleeve | mm | |
Diameter of Center Through Hole | mm | |
Center Height (Vertical) | mm | |
Table Height (Horizontal) | mm | |
Table T-slot Width | mm | |
Guide Block Width | mm | |
Min. Increment | deg. | |
Indexing Precision | sec. | |
Repeatability | sec. | |
Clamping System (Pneumatic) |
kg/cm2 | |
Clamping Torque | kg-m | |
Servo Motor Model | FANUC | Taper shaft |
MITSUBISHI | Taper shaft | |
Speed Reduction Ratio | - | |
Max. Rotation Rate of Table (Calculate with Fanuc α Motor) | r.p.m | |
Allowable Inertia Load Capacity (Horizontal) | kg.cm.sec2 | |
Allowable Workpiece Load | Vertical | kg |
with Tailstock | kg | |
Horizontal | kg | |
Allowable Load(with Rotary Table Clamping) | F | kgf |
FxL | kgf.m | |
FxL | kgf.m | |
Strength of worm gears | kg.m | |
Net Weight (servo motor excluded) | kg |
AR(s)-210R / 250R | AR(s)-255HR |
---|---|
Ø 210 / Ø 250 | Ø 255 |
Ø 67 | Ø 110 |
Ø 40H7 | Ø80H7 |
Ø 40 | Ø80 |
160 | 160 |
152 / 160 | 200 |
12H7 | 12H7 |
18h7 | 18h7 |
0.001 | 0.001 |
20 | 15 |
6 | 6 |
6 | 5 |
31 | 70 |
αiF4 / αiF8 / ßiS8 | αiF4 / αiF8 / βiS8 |
HG/HF-54 / 104 | HG/HF-104/154 |
1:90 | 1 : 120 |
44.4 *(33.3) | 33.3 *(25) |
8.3/11.7 | 20.3 |
75 | 100 |
150 | 250 |
150 | 250 |
1450 | 2000 |
110 | 150 |
31 | 70 |
18 *(14.6) | 55 *(19.6) |
55 / 58 | 116 |
- ★*()Alloy Steel worm & gear series.
DIMENSION
Powerful Brake System
AR(s)-170RFor Both Vertical and Horizontal Applications
AR(s)-170HR(Hydraulic Brake)
Powerful Brake System
AR(s)-210R / 250RFor Both Vertical and Horizontal Applications
AR(s)-210HR / 250HR(Hydraulic Brake)