-
AR Series:
Ø125-250 Pneumatic brake(Right Side Motor) -
AR Series:
Ø125-250 Pneumatic brake(Left Side Motor) -
AR Series:
Ø125-250 Pneumatic brake(Back Side Motor) -
Multi Spindle:
Ø125-210 Pneumatic Brake -
HR Series:
Ø210-800 Hydraulic Brake -
HR Series:
Ø320-400 Hydraulic Brake (Back Side Motor) -
2-wheel coupled Series:
Ø320 Hydraulic Brake -
iHHR Series:
Ø400 Hydraulic Brake (Embeded type)
CNC Rotary Tables (Min indexing angle – 0.001˚)
2-wheel coupled SeriesHydraulic Brake
HR-320B-2W
- SPECIFICATION
- DIMENSION
SPECIFICATION
Item/Model | Unit | |
---|---|---|
Table Diameter | mm | |
Diameter of Table Central Hole | mm | |
Inner Diameter of Mandrel Sleeve | mm | |
Diameter of Center Hole × Depth | mm | |
Center Height (Vertical) | mm | |
Table Height (Horizontal) | mm | |
Minimum distance between table centers | mm | |
Table T-slot Width | mm | |
Guide Block Width | mm | |
Min. Increment | deg. | |
Indexing Precision | sec. | |
Repeatability | sec. | |
Clamping System (Hydraulic) | kg/cm2 | |
Clamping Torque | kg-m | |
Servo Motor Model | FANUC | Direct Shaft without Key |
MITSUBISHI | Direct Shaft without Key | |
Speed Reduction Ratio | - | |
Max. Rotation Rate of Table (Calculate with Fanuc α Motor) |
r.p.m | |
Allowable Inertia Load Capacity (Horizontal) |
kg.cm.sec2 | |
Allowable Workpiece Load |
Vertical | kg |
with Tailstock | kg | |
Horizontal | kg | |
Allowable Load (with Rotary Table Clamping) |
F | kgf |
FxL | kgf.m | |
FxL | kgf.m | |
Strength of worm gears | kg.m | |
Net Weight (servo motor excluded) | kg |
HR-320B-2W |
---|
Ø 320 |
Ø 150 |
Ø 120H7 |
Big Bore Ø 120x217 Deep |
270 |
- |
400 |
14H7 |
18h7 |
0.001 |
15 |
6 |
35 |
115 |
αiF12/ßiS22 |
HG/HF-204 |
1:150 |
25 |
- |
150 |
350 |
- |
3000 |
300 |
115 |
80 |
- |